Cara Setting Modem

Adsl Modem D-Link

DSL-302T
Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

• Klik Setup
• Klik Connection
• Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
• Klik Tools
• Klik System Commands, Save All, Restart

Setting PPPoE/Router:

• Klik Setup
• Klik Connection
• Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
• Klik Tools
• Klik System Commands. Save All, Restart

---

adsl Modem Repotec

• Buka Internet Explorer ketik: http://192.168.1.1
• Username: admin & Password: epicrouter
• Klik: OK
• Klik WAN
• Pic Adapter: Pvc0
• Klik Submit
• Virtual Circuit = Enabled
• Bridge & IGMP = Disable
• Each region was different from another region and for Bandung vpi:8 , vci: 81
• Service Category = UBR without PCR
• Protocol/Conection type = PPPoE
• Encapsulation = LLC/Snap-Bridging
• Put Username & Password from your provider
• Klik Submit.
• Klik Save Configuration (wait till Saving configuration done.)
• put DNS: 202.134.0.155 & 202.134.2.5

---

Adsl Modem Dareglobal
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

• Klik Advanced Setup
• Klik WAN
• Find VPI/VCI: 8/81, Klik Edit
• ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
• Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
• Cheklist Enable Bridge Service, Service Name: Speedy, Next
• WAN Setup - Summary, Save
• Save/Reboot

Setting PPPoE:

• Klik Advanced Setup
• Klik WAN
• Cari VPI/VCI: 8/81, Klik Edit
• ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
• Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
• Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
• Centang Enable WAN Service, Service Name: Speedy, Next
• WAN Setup - Summary, Save
• Save/Reboot

---

Adsl Modem TP-Link
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

• Klik Advanced Setup
• Klik WAN
• Find VPI/VCI: 8/81, Klik Edit
• ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
• Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
• Cheklist Enable Bridge Service, Service Name: Speedy, Next
• WAN Setup - Summary, Save
• Save/Reboot

Setting PPPoE:

• Klik Advanced Setup
• Klik WAN
• Find VPI/VCI: 8/81, Klik Edit
• ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
• Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
• Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
• Cheklist Enable WAN Service, Service Name: Speedy, Next
• WAN Setup - Summary, Save
• Save/Reboot

---

---

Setting Modem Articonet ACN-100R dan ACN-110
Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:
a. Start � Control Panel � Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.
Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:

• Klik Start, klik Setting,klik Control Panel,
• Klik Network and Dial Up Connections.
• Klik Make New Connection, klik Next,
• Klik Dial Up to the Internet
• Klik I want to setup my internet manually, klik Next
• Klik I connect through a phone line and a modem klik Next
• Pilih dan klik modem ADSL yang sesuai
• Isi username:15xxxxxxxxxx@telkom.net
• Password: xxxxxxxx
• Klik OK dan Lanjutkan sesuai perintah yang muncul
• Klik Finish
Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:
• Klik Start, klik Setting, klik Control Panel.
• Klik Network Connection
• Klik Create a New Connection, klik Next.
• Klik Connect to the Internet, klik Next
• Klik Setup my connection manually, klik Next
• Klik Connect Using Dial Up, klik Next
• Klik modem ADSL yang sesuai, klik Next
• Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
• Confirm password: xxxxxxxx
• kemudian beri tanda v pada pilihan "Add a shortcut to the desktop screen"
• Klik Finish